Digital Electronic Gauge Gage Micrometer Disc Brake Rotor Micrometer Inch Metric Fractions Unit LCD Screen 0150mm High Accuracy Universal Measuring Tool-Fast Shipping

Description

Range and Resolution —- The measurement range of the rotor digital caliper is 06in/0150mm. Its accuracy is ±0.002in/0.05mm. The resolution is 0.0005in/0.01mm, 1/128in. Display: 1/2in x 1 1/2in (13mm x 38mm) LCD. Before use, loosen the fastening screws on the top of the watch, move the caliper and watch away smoothly, and wipe the measuring and guide with a cloth.

Wide Application —- Brake disc thickness measuring tool is designed for professional auto mechanics and heavy duty applications, widely used in home, industrial and automotive applications. Disc brake rotor micrometer can be converted among inch, millimeter and fraction units, switch freely according to your needs.

Manual On Off —- You can manual power off and on disc brake rotor caliper , effortless gliding action, hardened measurement surface, in use. Please note that for more accurate measurements, use a small piece of paper or card to clean the outer jaws before each use. Before measurement, the two outer measuring surfaces of the caliper must be kept in . Press the ON OFF key (that is, turn on the power switch), and then press the ZERO key to reset the LCD display number to zero.

Maintenance —- The measuring must be wiped clean before use. The caliper measuring surface, LCD display and other transmission parts should be kept clean. After measurement, the measuring claw should be closed to prevent dust, sand, metal chips and other objects from damaging the transmission parts. Before use, check whether each button is flexible and effective, and whether the digital display is stable and clear at any position

Maintenance —- The measurement of the workpiece should be carried out in a static state. When using it, the measurement force should be appropriate. The caliper with a micro roller should use a micro roller. The moving caliper frame should be stable, avoid pulling to the tail end or front end and collision, and avoid bumping and falling to prevent circuit failure, induction failure, LCD and measuring claw and other parts damage.